Sound Radiation by a Cylindrical Open Cavity with a Surface Source at the Bottom
DOI:
https://doi.org/10.24425/118079Keywords:
open cylindrical cavity, sound pressure, sound power, continuity conditionsAbstract
The rigorous solution describing the sound radiation by an arbitrary surface source located at the bottom of a cylindrical open cavity embedded in a flat baffle has been obtained. The open cavities of different shapes can be found in some architectural structures as well as are components of sensors, musical instruments and vehicles. The presented formulas have been expressed in the form of infinite sums. To use them, the infinite sums have to be truncated to the finite number of terms. Therefore, in practice, the results obtain based on the proposed solution are not exact and their accuracy is determined by the truncation error. The use of presented formulas is an alternative method for the finite element method (FEM). However, taking into account that the calculation efficiency of FEM rapidly decrease when a volume of considered region increases, the obtained in this study solution can be more useful in some practical cases. The approximated formula of a high computational efficiency has been presented for the sound pressure in the far field. The sound radiation has been analyzed for a rectangular piston as a sound source. The influence of cavity depth ratio on the radiation efficiency has been investigated. The cases for which the cavity radiation efficiency can be approximately calculated from the formula valid for a baffled sound source have been determined.References
Bhuddi A., Gobert M.-L., Mencik J.-M. (2015), On the acoustic radiation of axisymmetric fluid-filled pipes using the wave finite element (WFE) method, Journal of Computational Acoustics, 23, 1550011 (34 pages).
Choi W., Woodhouse J., Langley R.S. (2014), Sound radiation from a vibrating plate with uncertainty, Journal of Sound and Vibration, 333, 3966–3980.
Debnath L., Bhatta D. (2015), Integral transforms and their applications, CRC Press Taylor & Francis Group, New York.
Gonzalez L.M., Cobo P., Theofilis V., Valero E. (2013), Acoustic resonances in 2D open cavities, Acta Acustica united with Acustica, 99, 4, 572–581.
Hasheminejad S.M., Shakeri R., Rezaei S. (2012), Vibro-acoustic response of an elliptical plate-cavity coupled system to external shock loads, Applied Acoustics, 73, 757–769.
Jeong U.-C, Kim J.-S., Kim Y.-D., Oh J.-E. (2016), Reduction of radiated exterior noise from the flexible vibrating plate of a rectangular enclosure using multichannel active control, Applied Acoustics, 105, 45–54.
Jurkiewicz J., Snakowska A., Smolik D. (2011), Acoustic impedance of outlet of a hard-walled unbaffled cylindrical duct for multimode incident wave, Acta Physica Polonica A, 119, 6A, 1061–1067.
Karban U., Schram C., Sovardi C., Polifke W. (2016), Tailored Green’s functions for the prediction of the noise generated by single and tandem diaphragms in a circular duct, Acta Acustica united with Acustica, 102, 5, 779–792.
Lee P.J., Kang J. (2015), Effect of height-to-width ratio on the sound propagation in urban streets, Acta Acustica united with Acustica, 101, 1, 73–87.
Leniowska L., Mazan D. (2015), MFC sensors and actuators in active vibration control of the circular plate, Archives of Acoustics, 40, 2, 257–265.
Mazur K., Pawełczyk M. (2016), Internal model control for a light-weight active noise-reducing casing, Archives of Acoustics, 41, 2, 315–322.
McLachlan N.W. (1955), Bessel functions for engineers, Clarendon Press, Oxford.
Meissner M. (2013), Acoustic behaviour of lightly damped rooms, Acta Acustica united with Acustica, 99, 5, 845–847.
Morse P.M., Ingard K.U. (1968), Theoretical Acoustics, McGraw-Hill, New York.
Ortiz S., Gonzalez L.M., Gonzalez Diaz C., Svensson U.P., Cobo P. (2016), Acoustic resonances in a 3D open cavity with non-parallel walls, Journal of Sound and Vibration, 363, 181–198.
Pelat A., Felix S., Pagneux V. (2009), On the use of leaky modes in open waveguides for the sound propagation modeling in street canyons, The Journal of the Acoustical Society of America, 126, 6, 2864–2872.
Prakash S., Kumar T.G.R., Raja S., Dwarakanathan D., Subramani H., Karthikeyan C. (2016), Active vibration control of a full scale aircraft wing using a reconfigurable controller, Journal of Sound and Vibration, 361, 32–49.
Rdzanek W.P. (2016), The acoustic power of a vibrating clamped circular plate revisited in the wide low frequency range using expansion into the radial polynomials, The Journal of the Acoustical Society of America, 139, 6, 3199–3213.
Rdzanek W.P., Rdzanek W.J., Szemela K. (2016), Sound radiation of the resonator in the form of a vibrating circular plate embedded in the outlet of the circular cylindrical cavity, Journal of Computational Acoustics, 24, 1650018 (23 pages).
Snakowska A. (2008), Diffraction of sound waves at the opening of a soft cylindrical duct, European Physical Journal – S T, 154, 1, 201–206.
Snakowska A., Jurkiewicz J., Gorazd Ł. (2017), A hybrid method for determination of the acoustic impedance of an unflanged cylindrical duct for multimode wave, Journal of Sound and Vibration, 396, 325– 339.
Sommerfeld A. (1964), Partial Differential Equation in Physics, Lectures on Theoretical Physics, Academic Press, New York.
Szemela K. (2015), Sound radiation inside an acoustic canyon with a surface sound source located at the bottom, Journal of Computational Acoustics, 23, 1550014 (22 pages).
Szemela K. (2017), The sound radiation from a surface source located at the bottom of an open rectangular cavity, Acta Acustica united with Acustica, 103, 2, 189–199.
Troian R., Shimoyama K., Gillot F., Besset S. (2016), Methodology for the design of the geometry of a cavity and its absorption coefficients as random design variables under vibroacoustic criteria, Journal of Computational Acoustics, 24, 1650006 (12 pages).
Unruh O., Sinapius M., Monner H.P. (2015), Sound radiation properties of complex modes in rectangular plates: a numerical study, Acta Acustica united with Acustica, 101, 1, 62–72.
Wiciak J., Trojanowski R. (2015), Evaluation of the effect of a step change in piezo actuator structure on vibration reduction level in plates, Archives of Acoustics, 40, 1, 71–79.
Wrona S., Pawełczyk M. (2016), Feedforward control of a light-weight device casing for active noise reduction, Archives of Acoustics, 41, 3, 499–505.
Yang C., Cheng L. (2016), Prediction of noise inside an acoustic cavity of elongated shape using statistical energy analyses with spatial decay consideration, Applied Acoustics, 113, 34–38.
Zawieska W.M., Rdzanek W.P. (2007), The influence of a vibrating rectangular piston on the acoustic power radiated by a rectangular plate, Archives of Acoustics, 32, 2, 405–415.
Published
Issue
Section
License
How to Cite
